Upcycling of exhausted reverse osmosis membranes into value-added pyrolysis products and carbon dots.

Lili Liang, Andrei Veksha, Muhammad Zahin Bin Mohamed Amrad, Shane Allen Snyder, Grzegorz Lisak
Author Information
  1. Lili Liang: School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798; Interdisciplinary Graduate Program, Nanyang Technological University, 1 Cleantech Loop, CleanTech One, Singapore 637141; Residues and Resource Reclamation Centre, Nanyang Environment and Water Research Institute, Nanyang Technological University, 1 Cleantech Loop, CleanTech One, Singapore 637141.
  2. Andrei Veksha: Residues and Resource Reclamation Centre, Nanyang Environment and Water Research Institute, Nanyang Technological University, 1 Cleantech Loop, CleanTech One, Singapore 637141.
  3. Muhammad Zahin Bin Mohamed Amrad: School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798.
  4. Shane Allen Snyder: School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798; Residues and Resource Reclamation Centre, Nanyang Environment and Water Research Institute, Nanyang Technological University, 1 Cleantech Loop, CleanTech One, Singapore 637141.
  5. Grzegorz Lisak: School of Civil and Environmental Engineering, Nanyang Technological University, Singapore 639798; Residues and Resource Reclamation Centre, Nanyang Environment and Water Research Institute, Nanyang Technological University, 1 Cleantech Loop, CleanTech One, Singapore 637141. Electronic address: g.lisak@ntu.edu.sg.

Abstract

Polymeric reverse osmosis (RO) membranes are widely used worldwide for production of fresh water from various sources, primarily ocean desalination. However, with limited service life, exhausted RO membrane modules often end up as plastic wastes disposed of predominantly by landfilling. It is imperative to find a feasible way to upcycle end-of-life RO membrane modules into valuable products. In this paper, the feasibility of RO membrane recycling via pyrolysis and subsequent conversion of resulting char into carbon dots (CDs) through HO-assisted hydrothermal method was investigated. RO membrane module pyrolysis at 600 °C produced oil (28 wt%), non-condensable gas (17 wt%), and char (22 wt%). While oil and gas can serve as fuel and chemical feedstock due to rich hydrocarbon content, char was found a suitable precursor for the synthesis of functional CDs. The resulting CDs doped with N (4.8%) and S (1.8%) exhibited excellent water dispersibility, narrow size distribution of 1.3-6.8 nm, high stability, and strong blue fluorescence with a quantum yield of 6.24%. CDs demonstrated high selectivity and sensitivity towards Fe in the range of 0-100 μM with the limit of detection of 2.97 μM and were capable of determining Fe in real water samples (tap water and pond water).

Keywords

MeSH Term

Carbon
Filtration
Hydrogen Peroxide
Osmosis
Pyrolysis
Quantum Dots

Chemicals

Carbon
Hydrogen Peroxide

Word Cloud

Similar Articles

Cited By