Electrospun PVDF/aromatic HBP of 4th gen based flexible and self-powered TENG for wearable energy harvesting and health monitoring.
Ramadasu Gunasekhar, Mohammad Shamim Reza, Kap Jin Kim, Arun Anand Prabu, Hongdoo Kim
Author Information
Ramadasu Gunasekhar: Department of Chemistry, School of Advanced Sciences, Vellore Institute of Technology, Vellore, 632014, India.
Mohammad Shamim Reza: Department of Advanced Materials Engineering for Information and Electronics, College of Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea.
Kap Jin Kim: Department of Advanced Materials Engineering for Information and Electronics, College of Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea.
Arun Anand Prabu: Department of Chemistry, School of Advanced Sciences, Vellore Institute of Technology, Vellore, 632014, India. anandprabu@vit.ac.in.
Hongdoo Kim: Department of Advanced Materials Engineering for Information and Electronics, College of Engineering, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea. hdkim@khu.ac.kr.
In recent times, high-performance wearable electronic devices that can transform mechanical force into electrical energy for biomedical monitoring applications are receiving an increasing amount of attention. In the present study, we focused on a flexible, self-powered and wearable triboelectric nanogenerator (TENG) based on electrospun polyvinylidene fluoride (PVDF)/aromatic hyperbranched polyester of 4th generation (Ar.HBP-G4, 0-40 wt.-% w.r.t. PVDF content) blend nanoweb as tribo-negative layer and melt-blown thermoplastic polyurethane (TPU) as tribo-positive layer for energy harvesting and human health monitoring applications. Among the varying Ar.HBP-G4 content used, incorporation of Ar.HBP-G4 (10 wt.-%) in PVDF (P-Ar.HBP-G4-10) showed higher increase in the triboelectric output voltage when compared to pristine PVDF and other Ar.HBP-G4 weight ratios. The optimized P-Ar.HBP-G4-10/TPU based TENG exhibited a peak-to-peak voltage (V) of 124.4 V under an applied load of 9.8 N and frequency 1 Hz which is superior to many other TENGs reported elsewhere. Higher triboelectric performance of P-Ar.HBP-G4 blend based TENG compared to that of neat PVDF is attributed to the effect of Ar.HBP-G4-10 in enhancing the degree of crystallinity and polar β-crystalline phase content (98.3%) in PVDF. The ability of the TENG to power up portable electronic devices is demonstrated when it is powered for 750 s while connected through a capacitor and a rectifier, and the TENG was able to operate 45 light-emitting diodes directly. Evaluation of the triboelectric output of the TENG device attached to different parts of the human body reveal significantly better output voltage and sensitivity for human health monitoring. The results of this work pave a new way to develop TENG based on P-Ar.HBP-G4 nanowebs for sustainable energy generation and wearable healthcare monitoring systems.
References
Polymers (Basel). 2023 May 19;15(10):
[PMID: 37242949]
